Joyetech eGo One CT Starter Kit

IN STOCK
€59.95
  • Joyetech eGo One CT Starter Kit

Joyetech also continues to develop on. They have gone one step further with the eGo ONE. Therefore, they proudly present: Joyetech eGo ONE CT. The innovation lies in the battery. Where you previously could change anything on the battery with the eGo ONE, you can now choose between three different battery settings: CT-Ti (Titanium) - CT Ni (Nickel) and CW mode. These settings eGo ONE CT Starter Kit has everything to do with the type of coil you are using. If you concentrated on normal Ohmage, make use of the CW mode. The battery automatically adjusts the output wattage of the coil you use. Use a 0.4 - 0.8 Ohm coil; 25W Use a 0,81 - 1.6 Ohm coil; 15W Use a 1.61 to 3.5 Ohm coil; 7.5 W Select the temperature control mode with a Ti (titanium) or Ni200 (Nickel) coil, you can reach the following maximum times: CT-Ti at up to 470 ° F or 243.33 ° C CT Ni on up 480 ° F or 248.88 ° C. thus, so hang the stands always on the coil / burner you use in your tank. Avoid burned coils, always select the right mode at the right coil. Furthermore, we know the Joyetech eGo ONE CT still be beautiful and convenient design. He also again easily charge through a Micro-USB cable (passthrough).

* Required Fields

€59.95

Details

Joyetech also continues to develop on. They have gone one step further with the eGo ONE. Therefore, they are proud to present:. Joyetech eGo ONE CT

The innovation lies in the battery. Where you previously could change anything on the battery with the eGo ONE, you can now choose between three different battery settings: CT-Ti (Titanium) - CT Ni (Nickel) and CW mode. These settings eGo ONE CT Starter Kit has everything to do with the type of coil you are using.

When you concentrated on normal Ohmage, make use of the CW mode. The battery automatically adjusts the output wattage of the coil you use

If you use a 0.4 - 0.8 Ohm coil.; 25W
Use a 0,81 - 1.6 Ohm coil; 15W
Use a 1.61 to 3.5 Ohm coil; 7.5 W

If you choose the temperature control mode with a Ti (titanium) or Ni200 (Nickel) coil, you can reach the following maximum times:

CT-Ti at up to 470 ° F or 243.33 ° C
CT ??Ni at up to 480 ° F or 248.88 ° C

This way the modes are always on the coil / burner you used in your tank. Avoid burned coils, always select the right mode at the right coil.

We know the Joyetech eGo ONE CT still be beautiful and convenient design. He also again easily charge through a Micro-USB cable (passthrough).
Additional Information
Content1,80ml
Package ContentsJoyetech eGo ONE CT Startset 1100mAh:
  • 1 x eGo ONE CT battery (1100mAh)
  • 1 x eGo ONE Atomizer (1,8ml - without coil)
  • 1 x eGo ONE CL-Ni coil (0,2 Ohm)
  • 1 x eGo ONE CL-Ti coil (0,4 Ohm)
  • 1 x eGo ONE CL coil (1,0 Ohm)
  • 1 x Micro-USB cable
  • 1 x Wall-loader
Joyetech eGo ONE CT Startset 2200mAh:
  • 1 x eGo ONE CT battery (2200mAh)
  • 1 x eGo ONE Atomizer (2,5ml - without coil)
  • 1 x eGo ONE CL-Ni coil (0,2 Ohm)
  • 1 x eGo ONE CL-Ti coil (0,4 Ohm)
  • 1 x eGo ONE CL coil (1,0 Ohm)
  • 1 x Micro-USB cable
  • 1 x Wall-loader
Write your review