Joyetech eGrip OLED 30W CL
Joyetech comes with a new variant of the Joyetech eGrip; The Joyetech eGrip OLED CL VW. This amazing all-in evaporator has a beautifully finished design and contains everything you need. The powerful box uses an internal battery with a capacity of 1500mAh which you get through the day. This battery is easy to charge via the micro-USB connector. Full charge of this device is very fast, in as much as 2.5 hours! This new variant uses a clear definition OLED screen where you can easily read your settings. Around the steam button you can adjust the wattage / voltage by turning on. These settings are instant to stand on your OLED screen. You can also read the full / empty the battery. In addition, this all-in Joyetech eGrip OLED CL up to 30W and you can make for your own coils! The eGo One coil can also be used in this device. Make sure that the silicone cap or coil sits on the head. This eGrip CL is easy to fill by removing a cover up on the side. We recommend using a needle bottle during filling, as the filling hole is on the small side. In order to replace or clean the coil can rotate at the bottom comes out of the coil. This is easy with the tool eGrip tool that is included in this set. With this tool, you can also control the airflow control. In short, the new Joyetech eGrip OLED CL is an all-in damper for both beginners and advanced evaporator. The powerful internal battery has a capacity of 1500mAh and has a maximum output of 30W. Variable voltage ranges from 2.0 to 8.0 V and variable wattage he goes from 5 to 30 W. The internal tank has a capacity of 3,6ml and is easy to fill through a door on the side of the heir evaporator. Coils for eGrip OLED: eGo one 1Ohm coils - recommended Voltage 2.9-4.5V Egrip RBA Base 1-1.2Ohm - recommended voltage 3-5.3V Caution: This product should not be sold in the Netherlands under the current legislation. Foreign customers may well buy this product.