The new handheld model in the iStick streak Eleaf the Eleaf iStick Pico. These small mod 18650 uses one battery (which is not included), and has a maximum wattage output of 75! The Micro-USB input, which is located on the front of the device, can be used to recharge the battery. Though we recommend it to charge the 18650 battery with a special charger designed for that purpose. This promoted and the lifespan of the battery, it will be more quickly charged. We have different chargers in our product range.
The Eleaf iStick Basic is a handy box that is easy to use for both beginners and advanced. This Eleaf iStick has an internal battery to a whopping 2300mAh! This set comes with a Eleaf HS Air 2 tank has an airflow control. The unique design of this new iStick is crowned with a magnetic contact between the tank and the box. He is easy to charge through a Micro USB port. You can thereby keep fumes during charging.
The Eleaf iStick family has again risen; the Eleaf iStick TC MOD has joined. This handy temperature controlled MOD with Melo 2 Clearomizer is a handy mod which works on a 18650 battery (not included). This powerful mod can deliver a maximum output of 60W. It uses a 510 socket for its tanks. This connection is spring-loaded, so that the quality of this connection is very high! This set includes a nickel and titanium coil. These are ideal for vapor temperature control mode. In a variable voltage vapor you the best between 0.15 and 3.5 Ohm and a temperature control mode, the vapor can best between 0.05 and 1.0 Ohms. The 18650 battery, which is not included, can be easily charged via a micro-USB port at the bottom of the device. This USB connection also support the passthrough mode allowing you to vapors and load time. Continue to read the settings of the handy OLED screen on the side of this Eleaf iStick TC Box mod. Note: This product should not be sold in the Netherlands under the current legislation. Foreign customers may well buy this product.
The handheld model is only 12 centimeters high and has a diameter of 19mm. In this dimension are the battery and the tank!
Eleaf within the family there is a new branch: the Eleaf Ijust D16. This starter kit of Eleaf is equipped with a powerful, high-end variable battery voltage battery. This is to set from 3.3 volts to 5 volts. The Wattage output is 10W. The battery has an LED screen on the bottom where you can easily read the settings. Also, can you read the full / empty is the battery, which acts as a percentage. With this starter can always vapors because this battery is passthrough. This allows you to easily vapors and charge at the same time! In this starter is provided a GS16S clearomizer, which contains a 1.8 ohm coil. Besides the clearomizer comes this set with a handy charger, instruction booklet and an extra BDC coil of 1.6 ohms.