The new Joyetech All-In-One (AIO either) is the new discovery of the trendsetting brand Joyetech. This system is designed so that your electric cigarette consists of a
Joyetech also continues to develop on. They have gone one step further with the eGo ONE. Therefore, they proudly present: Joyetech eGo ONE CT. The innovation lies in the battery. Where you previously could change anything on the battery with the eGo ONE, you can now choose between three different battery settings: CT-Ti (Titanium) - CT Ni (Nickel) and CW mode. These settings eGo ONE CT Starter Kit has everything to do with the type of coil you are using. If you concentrated on normal Ohmage, make use of the CW mode. The battery automatically adjusts the output wattage of the coil you use. Use a 0.4 - 0.8 Ohm coil; 25W Use a 0,81 - 1.6 Ohm coil; 15W Use a 1.61 to 3.5 Ohm coil; 7.5 W Select the temperature control mode with a Ti (titanium) or Ni200 (Nickel) coil, you can reach the following maximum times: CT-Ti at up to 470 ° F or 243.33 ° C CT Ni on up 480 ° F or 248.88 ° C. thus, so hang the stands always on the coil / burner you use in your tank. Avoid burned coils, always select the right mode at the right coil. Furthermore, we know the Joyetech eGo ONE CT still be beautiful and convenient design. He also again easily charge through a Micro-USB cable (passthrough).
The new Joyetech EVIC VTC Mini is a stylish answer to the Joyetech EVIC VT. This top quality box mod kit is a powerful, with a maximum output of 75W! He also has a temperature control mode which ranges from 100-315 ° C / 200-600 ° F. Included is the new Joyetech TRON S tank with a capacity of 4ml. Plus you'll also get three different coils; CL Ni coil (0.2 Ohms), a CL Ti coil (0.4 Ohms) and a CL coil (1.0 Ohms). These coils are eGo ONE coils which can be found in multiple devices. Pay attention; This box mod works on a 18650 battery which is not included. Note: This product should not be sold in the Netherlands under the current legislation. Foreign customers may well buy this product.
Joyetech comes with a new variant of the Joyetech eGrip; The Joyetech eGrip OLED CL VW. This amazing all-in evaporator has a beautifully finished design and contains everything you need. The powerful box uses an internal battery with a capacity of 1500mAh which you get through the day. This battery is easy to charge via the micro-USB connector. Full charge of this device is very fast, in as much as 2.5 hours! This new variant uses a clear definition OLED screen where you can easily read your settings. Around the steam button you can adjust the wattage / voltage by turning on. These settings are instant to stand on your OLED screen. You can also read the full / empty the battery. In addition, this all-in Joyetech eGrip OLED CL up to 30W and you can make for your own coils! The eGo One coil can also be used in this device. Make sure that the silicone cap or coil sits on the head. This eGrip CL is easy to fill by removing a cover up on the side. We recommend using a needle bottle during filling, as the filling hole is on the small side. In order to replace or clean the coil can rotate at the bottom comes out of the coil. This is easy with the tool eGrip tool that is included in this set. With this tool, you can also control the airflow control. In short, the new Joyetech eGrip OLED CL is an all-in damper for both beginners and advanced evaporator. The powerful internal battery has a capacity of 1500mAh and has a maximum output of 30W. Variable voltage ranges from 2.0 to 8.0 V and variable wattage he goes from 5 to 30 W. The internal tank has a capacity of 3,6ml and is easy to fill through a door on the side of the heir evaporator. Coils for eGrip OLED: eGo one 1Ohm coils - recommended Voltage 2.9-4.5V Egrip RBA Base 1-1.2Ohm - recommended voltage 3-5.3V Caution: This product should not be sold in the Netherlands under the current legislation. Foreign customers may well buy this product.
Turnkey sub-ohm kit from Joyetech. The Joyetech eGo Mega One set consists of a battery of 2600 mAh and an evaporator. The evaporator includes airflow control and can be equipped with 0.5 ohm or 1.0 ohm coils which are available separately.